Fax print hold function, Settings required for fax print hold, Enabling fax print hold – Sharp AR-M162 User Manual
Page 159: Fax print hold print hold data setting
30
BASIC OPERATIONS
FAX PRINT HOLD FUNCTION
Faxes are normally printed as soon as they are received.
This function is used to hold received faxes in memory rather than printing them as they are received. Faxes held in
memory are printed manually all at once.
Settings required for fax print hold
If a fax is received when auto power shut-off mode has activated ("TURNING THE POWER ON AND OFF" in the
"Operation manual (for general information and copier)"), the machine returns to normal operation in order to print
the fax. For this reason, if faxes are received at regular intervals, auto power shut-off will repeatedly activate and
deactivate and less power will be conserved.
If you wish to maximize the benefit of auto power shut-off at night and other times when printing of received faxes is
not immediately necessary, enable fax print hold. When fax print hold is enabled, receiving faxes when auto power
shut-off has activated will not cause auto power shut-off to deactivate.
Enabling fax print hold
1
In Fax mode, press the [SPECIAL
FUNCTION] key.
Begin the following procedure from the base screen of
Fax mode.
Press the [SPECIAL
FUNCTION] key to display the
special function menu.
(To select fax mode, see step 1
on page 18.)
2
Select "FAX PRINT HOLD" with the
[
] or [
] key.
3
Press the [OK] key.
4
Select "SETTING" with the [
] or [
]
key.
5
Press the [OK] key.
It is recommended that you enable and disable fax print hold as needed for your conditions of use; for example,
enable fax print hold during the night and disable it during the day.
• When fax print hold is enabled and received faxes are held in memory, the DATA indicator above the [FAX]
key on the operation panel blinks and a message appears in the display. (When the received faxes are printed,
the indicator stops blinking and the message no longer appears.)
• If the remaining free memory reaches 0%, fax reception will no longer be possible. For this reason, it is
important to constantly make sure that sufficient free memory remains and frequently print received faxes.
The percentage of free memory remaining appears in the base screen of fax mode. (Page 10)
If fax print hold is prohibited using "DISABLE FAX PRINT HOLD" (page 100) in the key operator programs, it will
not be possible to enable it.
Note
Note
2-SIDED
COPY
SPECIAL FUNCTION
ACC.
DUPLEX SCAN
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
SPECIAL FUNCTION
FAX PRINT HOLD
TIMER MODE
SENDING OPTIONS
GHI
OK
BACK
FAX PRINT HOLD
PRINT HOLD DATA
SETTING
OK