Storing destinations for scan to desktop, Scan to desktop destination information – Sharp AR-M162 User Manual

Page 252

Advertising
background image

8

BEFORE USING THE NETWORK SCANNER FUNCTION

Storing destinations for Scan to Desktop

The destination for Scan to Desktop is stored by the Sharp Network Scanner Tool Setup Wizard when "Network
Scanner Tool" is installed in your computer. For this reason, there is no need to store the Scan to Desktop
destination in the Web page. (The Network Scanner Tool is on the "Sharpdesk" CD-ROM that accompanies the
Network Expansion Kit.)
For information on Scan to Desktop system requirements, installing the Network Scanner Tool, and storing
the destination, see the "Sharpdesk installation guide" that accompanies the network expansion kit.
Normally your computer is stored as the destination by the method indicated above.

The following page for storing Scan to Desktop destination information appears when [Destination] is selected in the
menu frame, followed by [Desktop]. This page is used mainly by the system administrator in the following circumstance.

• When another machine that also has the network expansion kit is added to your network and you wish to send an

image scanned on the new machine to a destination stored on the existing machine

See

"Editing and deleting programmed transmission destinations" (page 10)

to select the Scan to Desktop

destination information that you wish to use on the new machine and enter the displayed information in this screen in
the new machine. (When you have completed all entries, click [Submit].)
If there are several destinations that you wish to use on the new machine, repeat this procedure as needed.

If the information entered here differs from the information entered on the host computer, transmission/reception will
not be possible.
For the settings, see the following table.

Scan to Desktop destination information

* If you entered a host name in "Hostname or IP Address", you will need to enter the DNS server settings. (

Page 13

)

Item

Description

Name (Required)

Enter the name of the destination (up to 36 characters).

Initial (Optional)

Enter initial text for the destination (maximum of 10 characters). When the destination
list is displayed in the destination control screen, the initial text is used to group the
destinations.

Custom Index

Names can be assigned to the custom indexes as desired (

page 5

), allowing

convenient grouping of destinations.
Drop down list: Select a custom index for the destination to be stored.
User checkbox: When this is selected, the destination is stored in the user tab of the address

book. (

Page 22

)

Hostname or IP Address
(Required)*

Enter the IP address or host name of the FTP server (maximum of 127 characters).

Port Number (Required)

Enter a port number from 0 to 65535 for the desktop network scanner tool.

Process Directory
(Optional)

Enter the destination directory name for the file (maximum of 200 characters). The file
will be processed in this directory after it is received.

User Name (Optional)

Enter the login user name for the network scanner tool (maximum of 32 characters).

Password (Optional)

Enter the login password for the network scanner tool (maximum of 32 characters).

Advertising
This manual is related to the following products: