Sharp AR-M162 - Manual (Page 308)

24
WEB FUNCTIONS OF THE MACHINE
Printer condition settings
Factory default settings are indicated in bold.
Default settings
PCL settings
PostScript settings
"PostScript Settings" only appears when the PS3 expansion kit is installed.
Item Settings Description
Copies 1-999 This is used to select the number of copies.
Orientation Portrait, Landscape This sets the orientation of the printed page. Select [Portrait]
when the image is longer in the vertical direction, or [Landscape]
when the image is longer in the horizontal direction.
Default Paper Size A3, B4, A4, A4R, B5,
B5R, A5, Ledger,
Legal, Foolscap,
Letter*, Letter-R,
Invoice This sets the default paper size used for printing. Even if the
set size of paper is not in any of the trays, the printed image
is formed in accordance with this setting.
*Factory default setting is A4 in some regions.
Default Paper Source Auto, Tray 1,
Tray 2*, Tray 3*,
Tray 4*, Bypass
(Manual), Bypass (Auto) Set the default paper tray.
*Selections available depend on the trays that are installed.
Disable Blank Page Print Enable, Disable When this is set to "Enable", blank pages are not printed.
2-Sided Print 1-Sided,
2-Sided (Book),
2-Sided (Tablet) When [2-Sided (Book)] is selected, two-sided printing takes place
so as to allow binding at the left side. When [2-Sided (Tablet)] is
selected, two-sided printing takes place so as to allow binding at
the top. (Only for models that support two-sided printing.)
ROPM* Enable, Disable This enables the ROPM function. When enabled, multi-page
print jobs are stored in memory before printing, and thus the
computer does not need to repeatedly send the print data
when multiple copies are printed.
* This setting is only effective when the dual function board is
installed.
Item Settings Description
Symbol Set Select one of 35 sets. This specifies which country's characters (PCL symbol set)
are assigned to certain of the symbols in the character code
list. The factory default setting is [PC-8].
Font Select one internal or
one expansion font. This specifies which PCL font to use for printing. One font can
be specified from among the internal fonts and expansion
fonts (when the barcode font kit or the Flash ROM kit is
installed). The factory default setting is [0:Courier].
Line Feed Code CR=CR; LF=LF;
FF=FF, CR=CR+LF;
LF=LF; FF=FF,
CR=CR; LF=CR+LF;
FF=CR+FF,
CR=CR+LF;
LF=CR+LF;
FF=CR+FF This specifies the line break code by means of a combination
of the "CR" (return) code, "LF" (line break) code, and "FF"
(page break) code. The factory default setting is printing
based on the transmitted code. The setting can be changed
by selecting one of four combinations.
Wide A4 Enable, Disable This setting can be enabled to print 80 lines on A4 size paper
with each line 10CPI font (English characters). When the
setting is disabled (a checkmark does not appear), each line
is 78 characters long.
Item Settings Description
Print PS Errors Enable, Disable When this setting is enabled, an error description is printed
each time a PostScript error occurs.