ADC AVIDIA SWD4573I1 - Manual (Page 142)

Configuring SDSL Frame Alarm Profiles
116 Avidia System Configuration and Management User Manual
The following screen shows an example of both show alarm commands.
Deleting SDSL Frame Alarm Profiles
1 From the ::alarm=> prompt, type show then press to display the configured
SDSL frame alarm profiles.
2 Note the index number of the profile you want to delete.
3 Type the delete command in the following format then press .
delete <index>
Parameter
<index>
The index number of the alarm profile you want to delete.
Example
::alarm=> delete 3
You cannot delete profiles that are assigned to ports.
::alarm=> show 1
Index
LOSW Mgn Mgn_Mode ES ES_Mode UAS UAS_Mode
1 enable 6 enable 17 enable 60 enable
::alarm=> show
Index
LOSW Mgn Mgn_Mode ES ES_Mode UAS UAS_Mode
1 enable 6 enable 17 enable 60 enable
2 disable 6 enable 17 disable 60 enable
ENTER
ENTER