ADC AVIDIA SWD4573I1 - Manual (Page 270)

Modifying RIP Configuration
244 Avidia System Configuration and Management User Manual
Examples
::rip=> show
::rip=> show 10.0.0.120
A screen similar to the following displays.
Information Description
Index The RIP Configuration Table row index number.
IPAddr The IP address of the routing session.
Send The type of RIP packets to be sent. The RIP type is determined by the
RIP version used by the other routers in the network. The options are:
• donotsend (no RIP packets are sent)
• ripv1
• ripv1c (RIP2-type packets that are compatible with
RIP 1)
• ripv2
Receive The type of RIP packets to be received. The options are:
• ripv1
• ripv2
• v1orv2
• donotreceive (no RIP packets are received)
Hop Count The number of hops the packets are allowed to cross before arriving at
their destination.
Authentication Indicates whether a password is required to enable the router to learn
information from the session ports in the same network segment. The
options are No Authentication or Simple Password (text string).
::rip=> show
Index IPAddr Send Receive Hop Count Authentication
1 10.0.11.37 ripv1c v1orv2 5 No