ADC AVIDIA SWD4573I1 - Manual (Page 268)

Modifying RIP Configuration
242 Avidia System Configuration and Management User Manual
Example
::arptb=> delete 2
M
ODIFYING
RIP C
ONFIGURATION
The RIP Configuration Table displays information about the Routing Information Protocol
(RIP) used for each routing session. You configure RIP information initially during session
configuration, however you can modify it using the following procedures.
You modify RIP information from the ::rip=> prompt. From the ::root=> prompt, type
the following command then press to display the ::rip=> prompt.
configuration routing rip
Modifying RIP
1 From the ::rip=> prompt, type show then press to display the RIP configuration
for each session.
2 Note the index number of the RIP Configuration Table entry you want to modify.
3 Type the modify command in the following format, then press .
modify <index> [-send(ripv1c|ripv1|ripv2|donotsend)]
[-recv(ripv1|ripv2|v1orv2|donotrecv)] [-key <plain text
password>] [-auth none]
Parameters
<index>
The RIP Configuration Table index number of the entry you want to modify.
[-send(ripv1c|ripv1|ripv2|donotsend)]
• ripv1c — send RIP Version 1c packets only (RIP 2-type packets that are compatible
with RIP 1)
• ripv1 — send RIP Version 1 packets only
• ripv2 — RIP Version 2 packets only
• donotsend — no RIP packets are sent
ENTER
ENTER
ENTER