Deleting ip routing table entries, Modifying rip configuration, Rip c – ADC AVIDIA SWD4573I1 User Manual
Page 523: Odifying, Onfiguration
Chapter 24: Configuring Bridging and Routing
Avidia System Configuration and Management User Manual
497
Deleting IP Routing Table Entries
1
Locate the table row that contains the IP routing entry you want to delete.
Click
and
if necessary to view the entire table.
displays the beginning of the
table.
displays the next page of the table.
2
Click the
Delete
checkbox next to the row that contains the information you want to delete
3
Click the
Delete Checked Row(s)
button.
A confirmation dialog displays.
4
Do one of the following:
•
Click
OK
to delete the selected table entry and return to the
IP Routing Table
window.
•
Click
Cancel
to return to the
IP Routing Table
window without deleting the table entry.
M
ODIFYING
RIP C
ONFIGURATION
The RIP Configuration Table displays information about the Routing Information Protocol
(RIP) used for each routing session. You configure RIP information initially during session
configuration, however you can modify it using the following procedures.
You modify RIP information from the
RIP Configuration Table
window.
Do one of the following
to open the
RIP Configuration Table
window:
•
In the
Site Map Navigation
window, click
RIP Configuration
.
•
In the
Tree Navigation
window, click
Configuration Management
,
Bridge/Route
,
RIP
Configuration
.