Modifying a frame relay configuration, Odifying, Rame – ADC AVIDIA SWD4573I1 User Manual
Page 501: Elay, Onfiguration
Chapter 23: Configuring Frame Relay Interworking
Avidia System Configuration and Management User Manual
475
e
In the
DE Value
box, select the value used when
DE Mode
is set to
2
(
0
or
1
).
The DE Value determines the content of the frame relay DE field when
DE Mode
is set
to
2
.
0
—The network cannot discard frames.
1
—The network can discard frames.
10
Do one of the following:
•
To save the frame relay configuration click
Set
, then in the confirmation dialog click
Back
to return to the
Frame Relay Interworking Configuration Table
window.
•
To cancel the configuration and return to the
Frame Relay Interworking Configuration
Table
window, click
Cancel
.
M
ODIFYING
A
F
RAME
R
ELAY
C
ONFIGURATION
You modify a frame relay configuration from the
Frame Relay Interworking Configuration Table
window. You can only modify the parameters appropriate for the existing configuration. For
example, if FRF.8 is the interworking standard, you cannot select FRF.5. Other parameters,
such those for channel, line, and circuit, display for your reference.
1
In the
Frame Relay Interworking Configuration Table
window, locate the table row that contains
the frame relay interworking configuration you want to modify.
Click
and
if necessary to view the entire table.
displays the beginning of the
table.
displays the next page of the table.
2
Click
next to the row that contains the information you want to modify. The
Modify
Frame Relay Interworking Configuration
window displays.