ADC AVIDIA SWD4573I1 - Manual (Page 150)

Configuring SDSL Cell Service
124 Avidia System Configuration and Management User Manual
Deleting SDSL Cell Alarm Profiles
1 From the ::alarm=> prompt, type show then press to display the configured
SDSL cell alarm profiles.
2 Note the index number of the profile you want to delete.
3 Type the delete command in the following format then press .
delete <index>
Parameter
<index>
The index number of the alarm profile you want to delete.
Example
::alarm=> delete 3
C
ONFIGURING
SDSL C
ELL
S
ERVICE
Before configuring an SDSL cell port, make sure you have:
You configure SDSL cell channels from the ::cell=> prompt. From the ::root=> prompt,
type the following command, then press to display the ::cell=> prompt.
configuration sdsl cell
You cannot delete profiles that are assigned to ports.

Set up the desired SDSL cell line profile (see
“Configuring SDSL Cell Line Profiles” on
page 119 for instructions).

Set up the desired SDSL cell alarm profile (see
“Configuring SDSL Cell Alarm Profiles”
on page 121 for instructions).
ENTER
ENTER
ENTER