Adding sdsl cell port configurations – ADC AVIDIA SWD4573I1 User Manual
Page 151
Chapter 6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual
125
Adding SDSL Cell Port Configurations
Each SDSL cell port is automatically assigned a default configuration. The default profile index
number for each SDSL cell profile type is 1. This procedure describes how to modify the
configuration to reflect the desired service.
1
From the
::cell=>
prompt, type the following command then press
to display
the
::line=>
prompt.
profile line
2
Type show then press
to display the configured line profiles.
3
Note the index number of the line profile you want to assign to the channel.
4
Type the following command then press
to display the
::alarm=>
prompt.
configuration sdsl cell profile alarm
5
Type show then press
to display the configured alarm profiles.
6
Note the index number of the alarm profile you want to assign to the channel.
7
Type the following command then press
to display the ::cell=> prompt.
configuration sdsl cell
8
Type the set command in the following format then press
.
set <port> <lpindex> <apindex> (up|down)
[-scramble (enable|disable)]
Parameters
<port>
The channel slot and port number (format slot.port).
<lpindex>
The index number of the line profile you want to assign to this channel.
<apindex>
The index number of the alarm profile you want to assign to this channel.
(up|down)
The administrative status of the line: Up activates the port. Down deactivates the port.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER