ADC AVIDIA SWD4573I1 - Manual (Page 459)

Chapter 22: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 433
C
ONFIGURING
PVPC
S
Configure PVPCs from the PVPC Configuration Table window. From this window, you can
optionally configure backup PVPCs for the primary PVPCs. Backup PVPCs are redundant to
primary PVPCs. A primary PVPC automatically switches to a backup PVPC if the primary
PVPC were to fail. Do one of the following to open the
PVPC Configuration Table window:
• In the Site Map Navigation window, click ATM then PVPC Configuration Table .
• In the Tree Navigation window, click Configuration Management, ATM, then PVPC Configuration .
The PVPC Configuration Table window displays.
PVPCs carry data between defined points within the Avidia chassis, such as between a
cell-based channel card and a line card (see
“Configuring PVCCs” on page 443 for creating
cross-connects from a frame-based channel card). PVPCs also carry data from subscriber
modems to Avidia channel cards, and from Avidia line cards to other destinations in the
ATM backbone network.
PVPC configuration requires specifying a Virtual Path Identifier (VPI). For PVPCs, the system
only translates the VPI value and does not check or change any configured Virtual Channel
Identifier (VCI) value.