ADC AVIDIA SWD4573I1 - Manual (Page 146)

Configuring SDSL Cell Line Profiles
120 Avidia System Configuration and Management User Manual
Parameters
<rate>
The desired transmit rate, in kbps. The valid range supported by the SDSL cell card is from
64 to 2,048, in increments of 64. However, the specified rate must be supported by the
remote modem. See the remote modem documentation to verify the supported data rates.
Example
::line=> new 768
Displaying SDSL Cell Line Profiles
From the ::line=> prompt, type the show command in the following format, then press
.
show [<index>]
Parameter
[<index>]
The SDSL cell line profile table index number of the profile you want to display. Omitting
this parameter displays the entire SDSL cell line profile table.
Examples
::line=> show 1
::line=> show
The following screen illustrates an example of both show line commands.
ENTER
::line=> show 1
Index Rate_Mode Rate
1 Fixed 1536
::line=> show
Index Rate_Mode Rate
1 Fixed 1536
2 Fixed 768