ADC AVIDIA SWD4573I1 - Manual (Page 97)

Chapter 3: Applications and Configuration Overview
Avidia System Configuration and Management User Manual 71
Frame-based Services
Set up service for either an IDSL or SDSL frame-based card using one of the following sections.
SDSL Frame Service
The following shows the configuration process for setting up SDSL frame-based service.
• Create one or more SDSL frame line profiles. See “Configuring SDSL Frame Line
Profiles” on page 111 (command-line interface) or “Configuring SDSL Frame Line
Profiles” on page 393 (Web interface).
• Create one or more SDSL frame alarm profiles. See “Configuring SDSL Frame Alarm
Profiles” on page 114 (command-line interface) or “Configuring SDSL Frame Alarm
Profiles” on page 395 (Web interface).
• Provision service for the SDSL frame card. Configure the ports (includes selecting the
SDSL frame line profile and SDSL frame alarm profile for each port). See
“Configuring
SDSL Frame Service” on page 117 (command-line interface) or “Configuring SDSL
Frame Service” on page 397 (Web interface).
• Create the VCC through the Avidia system (from the line card to the SDSL frame-based
card). See
“Configuring PVCCs” on page 170 (command-line interface) or “Configuring
PVPCs” on page 433 (Web interface) for more information.
• Configure a session to set the service and encapsulation types for the VCC. The available
encapsulation types depend upon the service type you select and both must match the
modem encapsulation type. See
“Configuring Bridging and Routing Sessions” on page 228
(command-line interface) or “Configuring Bridging and Routing Sessions” on page 486
(Web interface) for more information.