Displaying atm routing table entries – ADC AVIDIA SWD4573I1 User Manual
Page 223
Advertising
Chapter 8: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual
197
<slot.port>
The line card slot and port to which you want to route the traffic when the current line card
fails.
[-admin (active|inactive)]
The administrative status of the routing table entry. Type
-admin active
to activate it
or type
-admin inactive
to deactivate it.
Example
::route=> new 39:26:34:34:75:85:11:08 5 12.1 -admin active
Displaying ATM Routing Table Entries
From the
::route=>
prompt, type the show command in the following format, then press
.
show [<slot.port>]
Parameter
[<slot.port>]
(Optional) The slot and port for which you want to display ATM routing information.
Omitting this parameter displays the entire ATM Routing Table.
ENTER
Advertising