ADC AVIDIA SWD4573I1 - Manual (Page 30)

Configuration Features
4 Avidia System Configuration and Management User Manual
C
ONFIGURATION
F
EATURES
The Avidia system enables you to configure:
• system information, such as system name and location, contact, date and time
• management card IP address, subnet mask, and default gateway
• trap receivers and trap generation status
• community strings
• ATM traffic profiles that define the traffic type and Quality of Service (QoS) on a specific
channel. ATM traffic profiles are applied to permanent Virtual Channel Connections
(VCCs) and Virtual Path Connections (VPCs) during configuration.
• ATM VCC, VPC, and port policing
• bridging and routing sessions
• Frame Relay traffic profiles that define the traffic type and Quality of Service (QoS) on a
specific channel. Frame Relay traffic profiles are applied to Permanent Virtual Channels
(PVCs) during configuration. You can also specify either FRF.5 or FRF.8 interworking.
• ADSL cell-based card line profiles that define the rate mode, target margin, minimum and
maximum interleave transmit rate, and interleave depth. ADSL line profiles are applied to
ADSL channels during configuration.
• ADSL cell-based card alarm profiles that define the Loss Of Frame (LOF), Loss Of Signal
(LOS) and Errored Seconds (ES) thresholds. ADSL alarm profiles are applied to ADSL
channels during configuration.
• SDSL cell-based card line profiles that define the rate mode, target margin, minimum and
maximum interleave transmit rate, and interleave depth. SDSL cell line profiles are applied
to cell-based SDSL channels during configuration.
• SDSL cell-based card alarm profiles that define the Loss Of Frame (LOF), Loss Of Signal
(LOS) and Errored Seconds (ES) thresholds. ADSL alarm profiles are applied to ADSL
channels during configuration.