ADC AVIDIA SWD4573I1 User Manual
Page 502
Modifying a Frame Relay Configuration
476
Avidia System Configuration and Management User Manual
3
To modify the administrative status, in the
Admin Status
box select the desired setting (
Up
to
activate the frame channel card and line card connection or
Down
to deactivate it).
4
In the
Data Link
row, unless
LMI Type
is set to
None
you can do the following:
a
To modify the poll interval value, in the
Poll Interval
box type the value in seconds. The
valid range is 5 to 30, with 10 as the default.
b
To modify the inquiry interval value, in the
Inquiry Interval
box type the value. The valid
range is 1 to 255, with 6 as the default.
c
To modify the error threshold, in the
Error Threshold
box type the value. The valid range
is 1 to 10, with 3 as the default.
d
To modify the monitor events value, in the
Monitor Events
box type the value. The valid
range is 1 to 10, with 4 as the default.
5
If
Interworking FRF.5
displays, you can do the following:
a
To modify the Rx LP mode, in the
Rx LP Mode
box select the desired setting (
1
or
2
).
b
To modify the Tx LP mode, in the
Tx LP Mode
box select the desired setting (
1
or
2
).
c
To modify the CLP mask, in the
CLP Mask
box select the mask used when
Tx LP Mode
is set to
2
(
0
or
1
).