ADC AVIDIA SWD4573I1 - Manual (Page 7)

Table of Contents
Avidia System Configuration and Management User Manual vii
T
ABLE OF
C
ONTENTS
Part I: Introduction and Initial Setup ___________________________1
Chapter 1: Avidia System Configuration and Management Overview_______________ 3
Configuration Features ........................................................................................................ 4
Performance Monitoring Features ....................................................................................... 6
System Administration and Diagnostic Features ................................................................ 7
Avidia System File Management ........................................................................................ 8
Restoring System Files.......................................................................................... 8
How Image Files are Used .................................................................................... 8
How Configuration Files are Used........................................................................ 8
How Hardware Profile Files are Used .................................................................. 9
Management Tools and Protocols ....................................................................................... 9
Chapter 2: Preparing for System Configuration and Management ________________ 11
Step 1: Connect a Terminal and Log On ........................................................................... 12
Step 2: Set the Management Card IP Addresses ............................................................... 13
Setting the System IP Address, Subnet Mask and Default Gateway .................. 13
Setting the Gateway IP Address.......................................................................... 14
Displaying the System IP Addresses................................................................... 14
Step 3: Select a Management Interface ............................................................................. 15
Step 4: Select an Access Method and Complete Setup ..................................................... 15
Accessing the Command-line Interface .............................................................. 15
Accessing the Web Interface............................................................................... 16
Next Steps.......................................................................................................................... 17