ADC AVIDIA SWD4573I1 - Manual (Page 228)

Configuring ATM Policing
202 Avidia System Configuration and Management User Manual
Parameters
<index>
The index number of the PVCC Table entry you want to configure.
<enable|disable>
The administrative status of policing on the selected port.
Example
::vcl=> modify 4 enable
Displaying the PVCC Policing Table
To verify the policing configuration for each PVCC, from the ::vcl=> prompt, type show
then press . A screen similar to the following displays.
PVP Policing
Policing, or UPC, enables you to specify whether traffic must conform to the configured traffic
contract. When policing is enabled, traffic that does not conform to the contract is deleted. You
can enable or disable policing by PVPC.
You enable or disable policing (UPC) by PVPC from the ::vpl=> prompt. From the
::root=> prompt, type the following command then press to display the ::vpl=>
prompt:
configuration atm upc vpl
ENTER
::vcl=> show
UPC
Index Port VPI VCI Status
1 1.1 0 1024 enable
2 2.1 0 115 disable
ENTER