ADC AVIDIA SWD4573I1 - Manual (Page 212)

Configuring PVCCs
186 Avidia System Configuration and Management User Manual
Displaying Frame Channel Card PVCC Information
From the ::pvcc=> prompt, type the show command in the following format then press
.
show [<slot> [<vpi> [<vci>]]]
Parameters
[<slot>]
(Optional) Specifies a slot for which to display the PVCC configuration. Omitting this
parameter displays all configured PVCCs.
[<vpi>]
(Optional) The VPI configured for the specified port. Omit this parameter if you did not
specify a port or to display all the configured PVCCs for the specified port.
[<vci>]
(Optional) The VCI configured for the specified port. Omit this parameter if you did not
specify a port, or if you specified a port but did not specify a VPI.
Examples
::pvcc=> show 2 0 379
::pvcc=> show
ENTER