ADC AVIDIA SWD4573I1 - Manual (Page 229)

Chapter 8: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 203
Configuring PVPC Policing
1 From the ::port=> prompt type show to display the PVPC Table.
2 Note the index number of the PVPC Table entry for which you want to configure policing.
3 From the ::vpl=> prompt type the modify command as follows, then press .
modify <index> <enable|disable>
Parameters
<index>
The index number of the PVPC Table entry you want to configure.
<enable|disable>
The administrative status of policing on the selected PVPC.
Example
::vpl=> modify 4 enable
Displaying the PVPC Policing Table
To verify the policing configuration for each PVPC, from the ::vpl=> prompt, type show
then press . A screen similar to the following displays.
ENTER
ENTER
::vpl=> show
UPC
Index Port VPI Status
1 1.1 0 enable
2 2.1 0 disable