ADC AVIDIA SWD4573I1 - Manual (Page 264)

Configuring IP Routing
238 Avidia System Configuration and Management User Manual
Information Description
Index The index number of the IP Routing Table row.
DestIp The IP address of the routing entry.
Mask The subnet mask used to specify what portion of the IP address is
considered when determining whether to route the packet based on
the data in this table row.
NextHop The IP address of the next router in the network to which the packet is
to be forwarded.
Sl
Po The slot and port of the session over which the packet is routed.
Vpi
Vci The VPI and VCI of the session over which the packet is routed.
Hop The number of hops the packet is allowed to make to get to its
destination. This value is used by the RIP. If the packet makes the
maximum allowable hops and is not yet at its destination, it is deleted.
Ty The type of routing connection. Options:
• D—Direct (local connection)
• I—Indirect (requires multiple hops)
• IV—Invalid (the route is invalid)
• O—Other (none of the above options)
Pr Protocol - the method by which the IP Routing Table entry was
learned. Options:
• L—Local (manually configured)
• R—RIP (learned dynamically)
• N—Network Management
• O—Other
Age The number of seconds the IP Routing Table entry has been in the
table. Learned entries are automatically deleted once their age exceeds
the maximum, which is determined by the routing protocol. The
maximum age under RIP is 180 seconds. Static routes must be
configured manually.