ADC AVIDIA SWD4573I1 - Manual (Page 391)

Chapter 17: System Maintenance and Administration
Avidia System Configuration and Management User Manual 365
The following screen illustrates an example of both display cards commands.
V
IEWING
SDSL F
RAME
CPE
GENERAL INFORMATION
You can view the software version number for each modem that is attached to an SDSL
frame port.
You view SDSL frame CPE general information using the command-line interface from the
::frame=> prompt. From the ::root=> prompt, type the following command then press
to display the ::frame=> prompt.
display stats sdsl frame
Type the modem command as follows, then press .
modem [<port>]
Parameter
[<port>]
The port for which you want to view CPE statistics. Omitting this parameter displays CPE
statistics for all SDSL frame ports.
Examples
::frame=> modem
::frame=> modem 3.2
::hardware=> cards
Serial Hardware Firmware Software
Slot Description Number Revision Revision Revision
1 management DMU_0001 0 n/a x.1021
3 12 port,ADSL/DMT/CELL FDAP980902 v2.3.4 v2.1.2 x.1021
12 OC-3/ATM/LINE 12345678 1.0 1.0 x.1021
::hardware=> cards 3
Serial Hardware Firmware Software
Slot Description Number Revision Revision Revision
3 12 port,ADSL/DMT/CELL FDAP980902 v2.3.4 v2.1.2 x.1021
ENTER
ENTER