Displaying aps configuration – ADC AVIDIA SWD4573I1 User Manual
Page 186
Configuring APS
160
Avidia System Configuration and Management User Manual
Parameters
<slot>
The slot number containing the OC3 card for which you want to issue a manual APS
command.
<(prot2workready|prot2work|work2prot|lockout|clear>
The command you want to issue.
•
prot2workready
—
switches traffic to the working channel if there are not other
conditions (such as the configured Wait To Revert Time or a failure condition) that
prohibit switching to that channel.
•
prot2work
—
switches the traffic to the working channel.
•
work2prot
—
switches the traffic to the protection channel.
•
lockout
—
disables APS.
•
clear
—
clears any of the previous APS commands and resumes the configured APS
operation.
Example
::aps=> command 2 prot2work
Displaying APS Configuration
To verify your APS configuration, from the
::aps=>
prompt, type the
show
command as
follows then press
.
show [<slot>]
Parameter
[<slot>]
The slot number for which you want to display the APS configuration. Omitting this
parameter displays the APS configuration for all slots.
ENTER