ADC AVIDIA SWD4573I1 - Manual (Page 293)

Chapter 12: Monitoring Subscriber Connections
Avidia System Configuration and Management User Manual 267
The following table describes the information displayed after you type a perf command.
M
ONITORING
SDSL F
RAME
CPE S
TATISTICS
You can monitor the transmitted and received octets for each modem that is attached to an
SDSL frame port.
You view SDSL frame CPE statistics using the command-line interface from the
::interfaces=> prompt. From the ::root=> prompt, type the following command then
press to display the ::interfaces=> prompt.
display stats interfaces
Type cpe then press .
A screen similar to the following displays.
Information Description
Port The port for which the performance data is displayed.
ESs (Network/Customer) The number of errored seconds that occurred during
the specified interval. Errored seconds are seconds
during which errors occur that prevent the payload
from being corrected.
UASs (Network/Customer) The number of unavailable seconds that occurred
during the specified interval. Unavailable seconds are
seconds during which the SDSL frame loop is not
synchronized.
ENTER
ENTER
::interfaces=> cpe
CPEPort LAN inOctets LAN outOctets WAN inOctets WAN outOctets
4.1 0 0 0 0
4.2 0 0 292924 32364