Setting the gateway ip address, Displaying the system ip addresses – ADC AVIDIA SWD4573I1 User Manual

Page 40

Advertising
background image

Step 2: Set the Management Card IP Addresses

14

Avidia System Configuration and Management User Manual

Examples

::ip=> addr 192.168.0.1 255.255.255.0

::ip=> addr 192.168.0.1

::ip=> addr 192.168.0.1 255.255.255.0 192.168.0.100

Setting the Gateway IP Address

If a gateway exists on the network to which the Avidia system is attached and you did not
configure the gateway with the IP address, type the defaultroute command in the following
format then press

.

defaultroute <gwaddr>

Parameter

<gwaddr>

The IP address of a router on the Ethernet network through which the Avidia system can
communicate with external networks (format xxx.xxx.xxx.xxx). The default gateway IP
address is 192.168.0.100.

Example

::ip=> defaultroute 192.168.0.100

Displaying the System IP Addresses

To verify your configuration, from the

::ip=>

prompt, type

show

then press

. A

screen similar to the following displays.

ENTER

ENTER

::ip=> show

AMC Card Ethernet Port IP Address:

192.168.0.1

AMC Card Ethernet Port IP Subnet Mask:

255.255.255.0

AMC Card Default Gateway:

192.168.0.100

Advertising