ADC AVIDIA SWD4573I1 - Manual (Page 195)

Chapter 8: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 169
Displaying Cell Channel Card PVPC Information
From the ::pvpc=> prompt, type the show command in the following format then press
.
show [<port> [<vpi>]]
Parameters
[<port>]
The port number for which you want to display the configured PVPC (format slot.port).
Omitting this parameter displays all configured PVPCs.
[<vpi>]
The VPI associated with the specified port. Omit this parameter if you did not specify a
port. If you did specify a port, but omit this parameter, all of the PVPCs configured on that
port display.
Example
::pvpc=> show 11.1 9
A screen similar to the following displays.
ENTER
::pvpc=>show 11.1 9
Source Destination TxTraffic RxTraffic
Index Port VPI Port VPI Index Index Admin Oper
2 3.1 9 11.1 9 1 2 up up