ADC AVIDIA SWD4573I1 - Manual (Page 147)

Chapter 6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 121
Deleting SDSL Cell Line Profiles
1 From the ::line=> prompt, type show then press to display the SDSL cell line
profile table.
2 Note the index number of the SDSL cell line profile you want to delete.
3 Type the delete command in the following format then press .
delete <index>
Parameter
<index>
The index number of the SDSL cell line profile you want to delete.
Example
::line=> delete 2
C
ONFIGURING
SDSL C
ELL
A
LARM
P
ROFILES
SDSL cell alarm profiles determine the conditions that generate SNMP traps. When the
configured thresholds are met or exceeded, the SNMP agent sends a trap to the configured trap
receiver(s). Only one trap is sent for each 15-minute data collection period. SDSL cell port
configuration requires assigning an alarm profile, therefore you must configure the desired
alarm profile prior to configuring the SDSL cell port. A default profile exists with an index of 1.
You cannot delete the default profile. Setting the threshold value to zero disables the trap.
You configure SDSL cell alarm profiles from the ::alarm=> prompt. From the ::root=>
prompt, type the following command then press to display the ::alarm=> prompt.
configuration sdsl cell profile alarm
You cannot delete profiles that are assigned to ports.
ENTER
ENTER
ENTER