Hale FoamLogix 6.5 - Manual (Page 11)

11 FoamLogix 3.3 / 5.0 / 6.5 Installer / Operations Manual
p/n: 029-0021-68-0
H ow To Us e T h is Ma nua l
❑
How to use this manual
This manual is divided into eight (8) sections for clarity and ease of use. Each of
the following sections can be stand alone or used in conjunction with each other.
1 SAFETY
This section must be carefully read, understood and adhered to strictly by
all installer/builders, operators and service personnel using the Hale Foam-
Logix, Models 3.3, 5.0 and 6.5, Electronic Foam Proportioning System. Do
not use or install the system until you have thoroughly read this section.
Failure to comply could cause serious injury to yourself and others, or dam-
age to the system.
2 INTRODUCTION
System overview provides an introduction to the Hale FoamLogix Propor-
tioning System along with guidelines for designing and ordering a complete
system.
3 INSTALLATION
This section offers installer/builder installation procedures, plumbing over-
view diagrams, electrical installation and startup and delivery check lists, to
assist the OEM with installation and initial setup of Hale FoamLogix Propor-
tioning System on an apparatus.
4 USER CALIBRATION
User calibration is used by the installer and the end user for start-up and
calibration of the Hale FoamLogix Proportioning System to produce the
proper foam flow.