Hale FoamLogix 6.5 - Manual (Page 130)

❑ Operation
130 FoamLogix 3.3 / 5.0 / 6.5 Installer / Operations Manual
p/n: 029-0021-68-0
Begin Foam Injection.
Establish water flow and press ON
button.
Change Injection Rate.
Read Injection Rate.
Press and HOLD and for two
(2) seconds. Release once desired
rate is set.
Press and release or . The dis-
play shows the injection rate and
returns to the selected function
after two (2) seconds.
Read Total Water or Foam
Solution.
Press i until LED below TOTAL FLOW
illuminates.
Operation Action Display
Figure 5-6: Normal Operation Summary Chart