Hale FoamLogix 6.5 - Manual (Page 139)

Ge ne ra l Ma inte nanc e
❑
139 FoamLogix 3.3 / 5.0 / 6.5 Installer / Operations Manual
p/n: 029-0021-68-0
6 Maintenance
6.1 MAINTENANCE PROCEDURES
After each use
1. Inspect wiring, hoses, flow sensors and connections for tightness, corrosion,
leaks and/or damage. See heading “System Plumbing Diagrams” on page 77.
Also see heading “Electrical” on page 85.
2. Flush the foam pump if a non-approved foam concentrate is used. Also see
heading “Appendix A: Foam Concentrate Compatibility” on page 149.
Monthly
Verify water flow calibration.
Every Two (2) Months
If an approved foam concentrate has been left in the system, operate the
FoamLogix system to move the foam concentrate and prevent jelling.
Annually
Verify foam feedback calibration.