Plumbing installation, Water and foam solution plumbing, Check valve manifold – Hale FoamLogix 6.5 User Manual
Page 59
59
FoamLogix 3.3 / 5.0 / 6.5 Installer / Operations Manual
p/n: 029-0021-68-0
Ins ta lle r Ins ta lla tion
❑
Plumbing Installation
Hale FoamLogix System plumbing diagrams are located in this section.
The diagrams provide recommended guidelines for the installation of sys-
tem components that handle water, foam concentrate and foam solution.
The sequence in which the plumbing installation is performed depends on
your individual installation requirements.
IMPORTANT !
AFTER INSTALLATION, MAKE SURE ALL PIPES, HOSES AND TUBES ARE
PROPERLY SUPPORTED USING THE BEST INDUSTRY PRACTICES. USE A
SUITABLE PIPE SEALING COMPOUND AT ALL JOINTS.
Water and Foam Solution Plumbing
When installing water and foam solution piping runs use the best industry
practices. Use a suitable pipe sealing compound at all joints.
Check Valve Manifold
Figure 3-6: Typical Check Valve Manifold Installation