Apple Shake 4 - Manual (Page 207)

Chapter 6 Importing Video and Anamorphic Film 207
Parameters
This node displays the following controls in the Parameters tab:
field
The field that is retained.
• 0 = even field
• 1 = odd field
mode
The mode in which the removed field is replaced (see above).
• 0 = replicate
• 1 = interpolate
• 2 = blur
Field
Located in the Other tab, this node extracts the even or the odd field of the image,
returning an image of half the Y resolution.
Parameters
This node displays the following controls in the Parameters tab:
field
Specifies the field that is extracted.
• 0 = even field
• 1 = odd field
SwapFields
Located in the Other tab, this node switches the even and odd fields of an image.
There are no parameters in the SwapFields node.