Apple Shake 4 - Manual (Page 549)

Chapter 20 Rotoscoping 549
Note: If you traced the image from another node, you’ll need to load the RotoShape
node into the Viewer to see the fill.
Important: You can only create filled shapes in the RotoShape node. To create single-
point and open shapes, use the Warper or Morpher node.
A single RotoShape node can contain more than one shape.
To create multiple shapes in a single node:
1 To create another shape, click the Add Shapes button again.
2 Use the techniques described previously to create the additional shape.
3 When you’re finished, click the first point you created to close the shape.
Each shape you create has its own transform control.