Apple Shake 4 - Manual (Page 332)

332 Chapter 11 The Flipbook, Monitor Previews, and Color Calibration
Note: This node also allows you to use calibration profiles generated by a Truelight
Monitor probe.
• The calibration profiles generated using TLCalibrate can then be used by the Truelight
VLUT control in the Viewer shelf.
The Truelight VLUT lets you previsualize the image in the Viewer as it will look after
being output from a film recorder, or displayed by a high definition monitor or
projector. You can use the Load Viewer Lookup command to make adjustments to
the Truelight VLUT parameters in the Parameters tab, choosing which device profile
you want to emulate.
• A second node in the Color tab, Truelight, performs the same function as the
Truelight VLUT, except that it can be added to the node tree. The Truelight node has
parameters that are identical to the Truelight VLUT that let you specify the device
profile, current display profile, and color space for the preview. Additional controls let
you fine-tune the preview.
Important: The Truelight functions are intended for previsualization only. They are not
intended for use as color correction operations.
For more information on using the Truelight plugins, see the Truelight documentation,
located in the Documentation folder on the Shake installation disk.