Apple Shake 4 - Manual (Page 662)

662 Chapter 23 Color Correction
The ColorCorrect Subtabs
The following table describes the ColorCorrect Parameter subtabs.
Note: You can only view one subtab at a time.
The Master, Low, Mid, and High Color Controls Tabs
The first four color control tabs (Master, Low, Mid, and High Controls) are identical
except for the portion of the image you are modifying. Each has the same matrix to
Add, Multiply (Gain), and apply a Gamma to the RGB channels, as well as apply contrast
on a per-channel basis (Contrast, Center, SoftClip).
To tune the color with the matrix, do one of the following:
m Numerically enter a value in the RGB value fields.
m Use the slider below each value field.
Subtab Description
Master Applies the same correction to the entire image.
Low Controls Applies the correction primarily to the darkest portion of the
image; the correction falls off as the image gets brighter.
Mid Controls Applies the correction primarily to the middle range of the image.
High Controls Applies the correction primarily to the highlights of the image; the
correction falls off as the image gets darker.
Curves Manual correction of the image using curves.
Misc Secondary color correction, as well as invert, reorder, and
premultiplication control.
Range Curves Display of the different image ranges (shadows, midtones,
highlights), their control curves, and the final concatenated curve
of the color correction.