Apple Shake 4 User Manual
Page 851
Chapter 27
Warping and Morphing Images
851
In this example, the connection lines are straightened in the eyes (see “
8
If necessary, adjust the amount of warp by modifying the overallDisplacement
parameter in the Parameters tab.
You can also adjust the displacement of each source/target shape pair individually
using the connectionDisplacement parameter in that pair’s connectionName
parameter.
A value of 0 in the overallDisplacement parameter results in an unwarped image. A
value of 0.5 produces a warp that’s halfway between the source and target shapes, and
a value of 1 results in a warp that completely conforms to the target shape.
To see the actual warp effect, choose Warped Image from the Select Display Image
pop-up menu in the Viewer shelf (or press the F11 key).
Final adjusted source/target shape pairs with modified connection points