Apple Shake 4 - Manual (Page 831)

Chapter 27 Warping and Morphing Images 831
Spline/Linear Mode Toggles selected to act as either corner points or
Bezier points.
Delete Control Point Deletes selected points on a shape.
Key Current Shape/
Key All Shapes Toggles between two shape keyframing modes. In
All Shapes, all shapes are keyframed whenever any
one shape is modified with Autokey on. In Current
Shape, only the selected shape is keyframed when
Autokey is on.
Enable/Disable Shape
Transform Control When turned on, this control makes the shape
transform controls for each shape visible in the
Viewer. Each shape can be manipulated as a whole
using this control. When turned off, all shape
transform controls are hidden, and cannot be used.
Visibility Toggles These buttons toggle the visibility of specific types
of shapes in the Viewer. From left to right, they
control:
• Source Shape Visibility
• Target Shape Visibility
• Connection Line Visibility
• Boundary (or lockdown) Shape Visibility
• Unconnected Shape Visibility
• Displaced Target Shape Visibility
Each control affects the visibility of all shapes of that
type in the Viewer. Individual shapes may be made
invisible using controls in the Parameters tab.
However, the Visibility toggles in the Viewer shelf
supersede the Visibility settings in the Parameters tab.
Each setting in the Select Display Image pop-up
menu of the Warper and Morpher Viewer shelf allows
these controls to be toggled independently. For
example, in the Warper, the visibility settings of the
source image can differ from those used by the
warped (target) image.
Button Description