Apple Shake 4 - Manual (Page 62)

62 Chapter 1 An Overview of the Shake User Interface
When LogLin conversion is enabled in VLUT 2, you still work on the log image in the
process tree, but you see the linearized plate. (For more information about
logarhtymic-to-linear conversion, see “
The Logarithmic Cineon File ” on page 437.)
To activate the VLUT or Viewer Script controls:
1 Apply your VLUT or script.
2 Right-click the VLUT (Viewer Lookup Table) button and select one of the three Load
Viewer Lookup options.
3 In the designated window or tab (selected in step 2), adjust any necessary parameters.
VLUTs have an additional right-click function to specify whether pixel values are
scrubbed from before or after the VLUT. Right-click and hold the VLUT button, and
enable (or disable) “Scrub before lookup.”