Apple Shake 4 - Manual (Page 462)

462 Chapter 16 Compositing With Layer Nodes
clipMode
Toggles between the foreground (0) or the background (1) image to set the output
resolution.
percent
A built-in fade parameter. This is the amount of the second image that is taken into
consideration. Full strength is 100. If set to 50, the added amount is reduced by 50
percent.
ignoreZero
Tells Shake to ignore black (zero) values.
IMult
The IMult node multiplies one input image by another input image. The second image’s
strength can be raised and lowered with the percent parameter. To multiply an image
by its own matte channel, use MMult.
Parameters
This node displays the following controls in the Parameters tab:
clipMode
Toggles between the foreground (0) or the background (1) image to set the output
resolution.
percent
A built-in fade parameter. This is the amount of the second image that is taken into
consideration. Full strength is 100. If set to 50, the added amount is reduced by 50
percent.
ignoreZero
Tells Shake to ignore black (zero) values.
Inside
The Inside node places one image inside only the mask of a second image, so that only
the mask of the second image is considered in the composite; the rest comes from the
color of the foreground image. This is an extremely useful node for masking images.
Parameters
This node displays the following control in the Parameters tab:
clipMode
Toggles between the foreground (0) or the background (1) image to set the output
resolution.