Lenze L-force I/O System 1000 - Manual (Page 14)

L-force Controls | I/O System 1000
Configuring the station structure
Search for connected devices
14
L
2.0 EN - 11/2010
3 Configuring the station structure
3.1 Search for connected devices
Instead of starting with an empty project, you can let the »Engineer« search for devices
that can be accessed online.
 When the search is completed, you can select in the start-up wizard which devices of
the ones identified are to be transferred to the project.

Note!
To read out the data, a communication link to the station via system bus (CAN)
is required. Communication via system bus (CAN)
( 23)

Stop!
In the fourth step "Read online data", the start-up wizard establishes
automatically an online connection via the selected interface after the Start
Search button has been pressed in order to be able to read out data from the
connected devices.