Lenze L-force I/O System 1000 - Manual (Page 93)

2.0 EN - 11/2010
L
93
L-force Controls | I/O System 1000
Application examples
Communication between I/O system 1000 and Inverter Drive 8400 via CAN fieldbus
2. Establish a CAN connection to the 8400 controller in the FB Editor.
– Insert the "LP_CanIn2" and "LP_CanOut2" port blocks in the FB Editor.
3. Connect the port blocks in the FB Editor.
– Connect "bIn1_B0" to "bJogSpeed1".
– Connect "bDriveReady" to "bOut_B0".