Lenze L-force I/O System 1000 - Manual (Page 25)

2.0 EN - 11/2010
L
25
L-force Controls | I/O System 1000
Communication via system bus (CAN)
Setting the communication path
4. Click the Search/Enter... button to check the bus connection selected from the Bus
connection list field.
• The Select Device Access Path dialog box is displayed:
5. Select the corresponding device in the upper Field devices located list field.
6. Click OK.
• The Select Device Access Path dialog box is closed.
• The Device Access Path column in the Communication path dialog box displays
the corresponding device access path (e.g. "can:/dev1/").
7. In the Communication path dialog box, click the Connect button to establish an
online connection to the I/O system 1000.