Lenze L-force I/O System 1000 - Manual (Page 41)

2.0 EN - 11/2010
L
41
L-force Controls | I/O System 1000
Parameter setting
Electronic modules - digital output
6.3.3.2 PWM function
Description
Both outputs of the electronic module are supported by the PWM function (pulse width
modulation). Through the selection of the time parameters, a pulse sequence with the
required duty cycle will be output.
Function
[6-1] Duty cycle of the output signal
PWM x Signal level - digital output PWM 1 or PWM 2
 Cycle duration
 Pulse duration
 Interpulse period
• The interpulse period results from the parameter settings for cycle duration and pulse duration. The
settings are used to determine the duty cycle.