Lenze L-force I/O System 1000 - Manual (Page 46)

L-force Controls | I/O System 1000
Parameter setting
Electronic modules - counters
46
L
2.0 EN - 11/2010
6.6 Electronic modules - counters
The parameter setting is exemplified using a counter which includes all possible functions.
The available range of functions depends on which counter has been selected.
6.6.1 Parameters tab
Use the Parameters tab to select the settings for the electronic module.

How to parameterise the electronic module:
1. Select the electronic module in the project view.
2. Click the Parameters tab in the workspace.
3. Select the settings.