Lenze L-force I/O System 1000 - Manual (Page 19)

2.0 EN - 11/2010
L
19
L-force Controls | I/O System 1000
Configuring the station structure
Creating a new project (select component from catalogue)
Step 2 - Properties
4. Enter the corresponding properties of the projects into the input fields (name,
order number, etc.).
• You can always change the properties subsequently.
• Later you will find the name as project name in the Project view.
5. Press Next.
Step 3 - Storage location
6. The Name entered before is suggested as project name. If required, change the
suggestion accordingly.
• The project name is also the name for the project directory to be created.