Lenze L-force I/O System 1000 - Manual (Page 29)

2.0 EN - 11/2010
L
29
L-force Controls | I/O System 1000
Parameter setting
6 Parameter setting
The objects of the I/O system 1000 are created dynamically in the Engineer. Depending on
the configured electronic modules, only those objects you need for parameter setting are
displayed.
• Comfortable parameter setting of electronic modules by selecting the corresponding
module from the project view and making the settings in the workspace.
• You can optionally set the parameters via the object lists which are available under the
"I/O system 1000: CAN" component, All parameters tab. CAN bus coupler