Lenze L-force I/O System 1000 User Manual
Page 63
Advertising
2.0 EN - 11/2010
L
63
L-force Controls | I/O System 1000
Parameter setting
SSI electronic module
Monitoring operation
In monitoring operation, the monitoring module is operated passively on an SSI encoder,
along with the master module. In this operating mode, the SSI encoder must be supplied
via the master module.
During operation, the module monitors the signals of the SSI telegram and provides the
received data in the form of a process image. Corresponding parameter setting must be
performed to adjust the module to the encoder. The "Baud rate" parameter is irrelevant.
[6.10] Block diagram: Monitoring operation
Advertising