Lenze L-force I/O System 1000 - Manual (Page 92)

L-force Controls | I/O System 1000
Application examples
Communication between I/O system 1000 and Inverter Drive 8400 via CAN fieldbus
92
L
2.0 EN - 11/2010
9 Application examples
9.1 Communication between I/O system 1000 and Inverter Drive 8400 via CAN fieldbus
Requirements
 The I/O system 1000 station is to communicate with an Inverter Drive 8400 via a CAN
fieldbus.
 The "Speed actuating drive" application is to be extended by CANIN2 and CANOUT2.
 The "bJogSpeed1" JOG value is to be activated via bit 1 of the "DI 8, DC 24V" electronic
module.
 The "bDriveReady" bit is to be output to bit 1 of the "DO 8, DC 24V" electronic module.
How to proceed
1. Search for devices connected to the fieldbus
– Execute the FileNew... command to call the Start-up wizard.