Lenze L-force I/O System 1000 - Manual (Page 44)

L-force Controls | I/O System 1000
Parameter setting
Electronic modules - analog output
44
L
2.0 EN - 11/2010
6.5 Electronic modules - analog output
6.5.1 "AOx 12Bit" electronic modules
Use the Parameters tab to select the settings for the electronic module. In addition, the
channel status is indicated.

How to parameterise the electronic module:
1. Select the electronic module in the project view.
2. Click the Parameters tab in the workspace.
3. Make settings for each channel.