Lenze L-force I/O System 1000 - Manual (Page 22)

L-force Controls | I/O System 1000
Configuring the station structure
Creating a new project (select component from catalogue)
22
L
2.0 EN - 11/2010
13. Add more electronic modules.
• Use the Select New Module button to put the selected electronic module to the
end.
• Use the Insert Module button to insert the selected electronic module in front
of the marked module.
• Use the Cut button to remove the marked electronic module.
• Use the Paste button to insert the electronic module cut before in front of the
marked module.
• Use the Duplicate button to copy the marked electronic module and insert it in
front of it.
• Use the Delete button to delete the marked electronic module.
• Use the ÍÎ buttons to move the marked electronic module to the right or left.
14. Press Complete.
Then, an I/O system 1000 may look as follows: